Nowadays, it is very common to use mechanical equipment to work. Although it needs to rely on exports in the early stage, with the continuous improvement of the domestic technological development level, basic accessories, or other devices, are constantly being improved and updated. The overall processing effect is relatively good, for example, the application of the setting machine, in the current development, the position occupied is also more important. The following is an analysis of the factors that generally interfere with the quality problems of the setting machine.
1. The number of drying boxes of the setting machine
If the setting machine can have two drying boxes, its drying effect is better. Generally speaking, the stable temperature of the drying box should not exceed 100°.
2. Steam pressure (temperature) and operating time
The higher the vapor pressure (temperature), the greater the effect, the easier it is to produce, and the more stable the shape will be. However, when the temperature, residence time or drying time exceeds a certain limit, the fabric loses its elasticity.
3. The material, style and size of the shaped board
The material of the sheet is different from its transmission coefficient, which may eventually be different from a final shape. Ordinary plates now have an aluminum plate and a stainless steel plate. Because the cooling of the aluminum plate is different from the stainless steel plate, the aluminum plates used are more commonly used to strictly regulate the use of the model standard. Each type has a suitable model requirement.
4. The raw material of the setting machine fabric
Under normal circumstances, the heat resistance of the raw materials increases, and the higher melting point needs to be above the set temperature. Each different raw material should be marked with different molding process parameters. Among them, using spandex, the more ingredients, the thinner the raw material, which reduces the setting temperature.
5. The impact of staff's business activities
In the process of producing bulk goods, during this inspection process, it is very important. If the registration is not positive, it will lead to the disposal of the cloth and to the people, steam, electricity supply and other waste. Therefore, in this process, workers must have a strong sense of responsibility, master quality standards, and have certain experience in the inspection field.
